Zac
- Total activity 6
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 1
Articles
Recent activity by Zac-
Best Practice: Configure Devices with the Manufacturer First, Then Add to ROAMiQ
OverviewWhen integrating third-party hardware with ROAMiQ, such as Victron, Shelly, Reolink, and other supported devices, the recommended process is to complete the device’s native setup using the ...
-
Control Hub Power Connection Locations
-
Peplink MAX BR1 Mini to ROAMiQ Control Hub
One end of an ethernet cord plugs into Port LAN 1, the other end of the ethernet cord plugs into the ROAMiQ Control Hub. The other LAN port can be used for connection to the Victron Cerbo. However...
-
Peplink MAX BR1 Mini to Victron Cerbo
One end of an ethernet cord plugs into Port 2, the other end of the ethernet cord plugs into the Victron Cerbo ethernet port. The other LAN port is used for the ROAMiQ Control Hub. However, if the ...
-
Peplink MAX BR1 Mini to PoE Switch
If the customer will be powering the ROAMiQ screen, or cameras, or anything else via PoE, Port 2 on the router should be used to connect a PoE Switch. Then, you can run of the PoE switch ports to t...